Insulation products

Want to know more about a specific product? Use the filters below to find what you are looking for.

home / Insulation / Products

grid_view list

Insulation — Boards

Insulation board EPS

Ultimate insulation of foundations, roofs, floors och facades

Insulation board EPS Grey

With 20% better insulation performance than white EPS

Insulation board XPS - Straight edge

XPS insulation with high compressive strength, high moisture resistance and excellent protection against heat and frost

Insulation board XPS - Rabbet Edge

Moisture resistant XPS board for insulation with specific demands for long-term compressive strength

Drainage board XPS

Insulating drainage board with vertical drainage channels for basement walls.

Drainage board EPS

EPS board with or without non-woven fabric for drainage and insulation of basement walls

Drainage board EPS Grey

Open to diffusion of inside moisture, stops outside moisture

Underfloor heating board IsoFlex

If you need to supplement your foundation with underfloor heating, BEWI's underfloor heating board is the obvious choice.

Plasterboard

BEWI's foam boards intended for facade insulation are an excellent alternative as wall insulation for both new construction and additional insulation...

Air gap board

For insulation of tier of logs in attics, BEWI Air gap board is the easiest and best alternative when you want to avoid condensation and mould...

StyroHeat

StyroHeat® has high strength, good insulation and is easily adapted to the floor design with ordinary hand tools.

Insulation — Construction elements

Foundation L-Unit

The baseboard units have been constructed so that you can easily build a safe and sustainable foundation.

Foundation L-unit

With an I-unit, you build a foundation in a rustic look. The brushed surface gives life to the foundation and gives your house a unique charm.

Foundation Garage-Unit

L-units for construction of e.g. garage where a raised plinth is desired.

Foundation TF-unit

BEWI TF-unit are used to be able to carry higher loads as in e.g. tile facade.

Styroment

Foundation L-unit concrete

The elements are designed to easily build up a safe and durable foundation.

BEWI ICF System

Low energy houses according to the building block principle

BEWI cast element

BEWIs cast element is a pre-assembled system for casting a slab on the ground. BEWI cast element is insulation and formwork in the same product. The...

Support system for ICF system

Customized for our ICF system. Makes it easy to adjust the working height when filling concrete.

BEWI I-unit

Insulating unit with additional cement board for a modern look.

Insulation — Bag

Return bag

Return bag for waste material.

Insulation — Blocks

Road blocks and filling

Cellulose reduces settlements and is used to advantage as easy filling in roads.

Insulation — Beads

Loose beads

Loose beads are suitable for weight reduction and insulation of concrete products, furniture filling, packaging and additional insulation. The size of...

Insulation — Foil

Polyethylene film

Cover foil

Construction foil various interior and exterior masking works.

Gram Vapor Barrier | Sugarcane

The world's first vapor barrier made of sugarcane

Gram Vapor Barrier | Standard PE

Age-resistant polyethylene film intended to be used as an air and vapor barrier in exterior walls, ceilings and floors.

Insulation — Pipe

Pipe insulation XPS

XPS box that minimizes the harmful effects of freeze thaw cycles on water and drainage installations

Insulation — Radon

RadoVent

Insulation — Accessories

Attachments

Attachments are used to attach cellular plastic on concrete, polish or light concrete when surfaces are uneven. Amount needed appr. 1 kg/4 m2.

Drainage collection cleat

Drainage collection boards are used in the construction of falls against roof drains and consists of combinations of wedges. Contact us if you need...

Slope of roof

With this system, you can build as wide roof pitches as you want. The backing board is an ordinary board with a certain thickness depending on which...

Roof Wedge

Roof wedge is used for building slopes at eaves, roof drains etc

Reinforcement distance

Reinforcement spacers are used during casting to ensure that the reinforcement bars end up at the correct height.

Drain strip

A finishing strip is used to cover the upper edge of the drainage boards.

Fixing Wedge

A fixing wedge is used to lock together two L-elements during priming. The fixing wedge is placed in the bevelled edge of the element.

Hulling

Plastic nails are used to hold the foam together with the plinth units and to hold the foam layers together during casting so the foam does not float...

Non-woven fabric

The fabric is used to prevent fine-grained material from penetrating and impairing the draining properties. The fabric has class II according to VV's...

Membrane insulation

Elastic membrane insulation is used for moisture protection of the lower part of the base sole. Consumption approx. 1-1.5 kg / m2. Can be applied at...

Nail plate

A nail plate is used to fix the base plates on units with each other and mould beams. The plate consists of unfolded metal tips that make the...

Winter Mat

BEWI Winter Mat is a concrete cover mat intended for covering eg freshly poured concrete, insulation against frost penetration, moisture and heat...

Joint plate

Joint plate is used to pull the plinth unit together at the outer edge. Consumption 1 pc per unit and 2 pcs per corner.

Insulation attachment

Polypropylene plastic fixing wing for locking insulationboard joints.

Electric knife

Electric hot knife for fast, clean cuts in EPS & XPS

Fastening

Fastening mortar is used to fasten EPS to concrete, plaster or lightweight concrete on uneven surfaces. Consumption approx. 1 kg / 4 m2.

Handheld cutter for EPS and XPS

Electric hot knife for fast, clean cuts in EPS and XPS

Pile mould

Insulation and mould for founding concrete plates for pole foundations.