Warning: Invalid argument supplied for foreach() in /home/bewi/public_html/wp-content/themes/bewi/resources/functions.php on line 1584
Warning: Invalid argument supplied for foreach() in /home/bewi/public_html/wp-content/themes/bewi/resources/functions.php on line 1584
Heated floor boards
Moulded EPS panels for radiant underfloor heating
Moulded EPS panels for radiant underfloor heating (EPS 200 G5 NEO and EPS 200 G7 NEO) allows for a quick, convenient and error-proof heated floor system installation. We only use BASF Neopor raw materials to make these boards, which by itself means they will have excellent thermal insulation and mechanical properties. With a minimum amount of insulation, the board will be able to achieve maximum thermal resistance.
Our boards for underfloor radiant heating have special gaps for pipes with 16 mm and 18 mm thickness. Formed diagonal ridges across the board lift the piping from the board surface, thus allowing concrete to encapsulate the tubing from all sides. These boards are especially relevant when a customer wants limited thermal insulation layer thickness or does not want to overload the floor.
Technical parameters
Type of polystyrene foam
EPS 200N
Thickness
50mm, 70mm
Standard dimensions
1200x600mm
Other parameters
With interlocking mechanism
Recommendations for use
Heated floor installation, where a limited room height loss is allowed
Heated floor installation, where a minimal increase in load for the floor is allowed
Easy and quick installation of piping for the radiant heated floor, eliminating the possibility of common mistake
Technical properties of polystyrene foam boards EPS 200 NEO
| Underfloor board name | G5 | G7 |
| Board thickness (insulating layer thickness) , mm | 50 (30) | 70 (50) |
| Long term water absorption by total immersion, WL(T)2 | ≤ 1,5 % | ≤ 1,5 % |
| Thermal conductivity, λD (W/m·K) | ≤ 0,030 | ≤ 0,030 |
| Compressive stress at 10% deformation, (kPa) | 200 | 200 |
| Bending strength, (kPa) | 250 | 250 |
| Reaction to fire | E | E |
All properties are declared in accordance with the requirements of the EU standard EN 13163: 2012 + A1: 2015 and related documents.
Certificates and approvals — Heated floor boards
Contacts
