Below DPC Cavity Insulation
Designed to be installed in cavity walls below DPC level.
| Our Below DPC Cavity Insulation is manufactured from expanded polystyrene (EPS) for installation in the cavity wall below damp proof course (DPC) level.
Installing this product will remove the thermal bridge at the junction between the ground floor and the external wall and assists in achieving compliance to Part L1 2021. Supplied in EPS 70 or EPS 70 HP. Performance details are in the table below. Is available in EPS 70E with flame retardant and EPS 70 without flame retardent. All products manufactured to BS EN 13163
|
Key Benefits
|
Product specification
Specify BEWI Below DPC Cavity Insulation to meet your required performance:
- EPS HP Fire Class E .030 W/mk
- EPS HP Fire Class F .030 W/mk
- EPS Fire Class E .038 W/mk
- EPS Fire Class F .038 W/mk
Dimensions:
| Standard size: | 1200mm x 375mm 1200mm x 450mm 1200mm x 600mm |
| Available in bespoke widths between 300mm to 600mm. |
| Standard thickness: | 50mm, 70mm, 90mm, 110mm and 140mm |
| Available in bespoke thicknesses from 20mm to 250mm | |
Easy to install
BEWI Below DPC Cavity Insulation is easy to handle and cut; making it easy to install. There is no need for specialised trades or equipment.
Environment
EPS has been awarded an A+ rating by the BRE’s Green Guide to specification.
Permanent
BEWI Below DPC Cavity Insulation is rotproof and durable and remains effective for the life of the building and is flood-proof.
Downloads — Below DPC Cavity Insulation
